Kanto LX600SW Full Motion Metal Stud TV Mount 34-65" TVs

Product highlights

What's in the box

• Wall-plate bracket with articulating arm 
• 2 TV brackets 
• Four M4x16mm bolts 
• Four M5x16mm bolts 
• Four M5x30mm bolts 
• Four M6x16mm bolts 
• Four M6x35mm bolts 
• Four M8x20mm bolts 
• Four M8x35mm bolts 
• Four M8x50mm bolts 
• Four 5mm spacers 
• Four 10mm spacers 
• Four 14mm spacers 
• Four M4 washers 
• Four M5/M6 washers 
• SNAPTOGGLE hardware (4 screws / 4 washers / 4 toggle-anchors) 
• Wrench 
• Hex-key 
• User Manual 
• Mounting Template 

Written by Crutchfield's Ralph Graves

Most modern apartment buildings and offices have metal studs. While they increase fire safety, they can make wall-mounting your TV a challenge.

The LX600SW mount comes with the specialized hardware necessary to mount to metal studs. Once you've drilled the holes in the studs, just slip these heavy-duty toggle bolts through. The toggles catch on the back of the studs, anchoring the bolts securely.

When fully retracted, this mount holds your TV 2-3/16" from the wall. Extended, it can hold your TV as far as 17" into your room.

You can swivel your mounted TV 45° in either direction, depending on the size of the screen. You can also tilt your TV up or down to avoid glare, and level it horizontally after installation.

This solid steel mount has a durable powder-coated finish. Clips keep cables and cords securely fastened to the arms. The LX600SW can support TVs with screen sizes between 34" and 65" and weighing up to 100 lbs.